Sump pumps - Dreno, Pedrollo and Homa submersible pumps for storm water, dirty water applications such as septic tanks and pits, solid handling capacity suitable for raw, untreated sewage. Wide range of submersible and dry well, available in single and three phase.
Flow rate up to 400 l/min (24 m3/h). Heads up to 35m.
The TOP series is suitable for draining clear water without abrasive particles. The range is very versatile as it comes in a number of configurations from the smallest drainage pump to a multistage which can be used as a booster pump to pressurise water supplies.
They are very competitively priced and all parts are non-corrosive.
Electric submersible drainage pumps with vortex , non-clogging impeller. Cast iron construction for durability. Double mechanical seal for maximum protection.
Pumps are ideal for inclement conditions and can handle solids from 35mm to 38mm. Motors are ecologically designed for low energy consumption and are available in single and three phase format.
Pumps can be fitted permanently or with flexible hoses for temporary site applications.
These are large Vortex impeller pumps mainly used for pumping sewage. They range from 2.2 kw to 22 kw and can handle flows up to 6000 litres/ min. They are generally fitted with double mechanical seals of Silicon Carbide for maximum protection.
Widely used throughout the country on many municipal and industrial sites, they are renowned for their trouble-free operation and long life service. Solids handling from 60mm to 100mm. Some models are available in explosion proof design.
Electric pumps with highly efficient, open multi-channel impellers. Cast iron electro-mechanical assembly, for submersible operation, supplied fitted with 2 mechanical seals in series. Oil-filled motor. Available in single and three phase.
They have a multitude of uses including small site drainage problems, temporary lifting of foul waters, rainwater disposal etc. Some models are available in stainless steel and also all bronze construction.
Multi-channel cast iron pumps for municipal and industrial applications. Open high-performance impeller, motor power 3 phase, ranging from 2.2 kw to 22 kw. Outlet sizes from 3” to 6” and flow rates up to 5,000 litres/min.
Ideal for effluents, dirty waters, rainwater disposal and all drainage applications. Solids handling from 50mm to 115mm. Some models are available in all stainless, all bronze construction and explosion proof.
Electric pumps with high head impeller. Cast iron electro-mechanical assembly, for submersible operation, supplied fitted with 1 mechanical seal and 1 lip seal in series. Ecological dry motor. Generally used where there is a requirement for a pump developing high pressure.
Suitable for domestic, agricultural and light industrial applications. Available from 1.5 to 7.5 kw and flows up 800 litres/min. Pressures up to 5 bar.
Vortex impeller submersible pumps with flow rate up to 500l/min (30 m3/h). Head up to 15m. Recommended for domestic, civil and industrial use in applications where the water contains suspended solids up to 50mm diameter.
Available from 0.6 to 1.1 kw in single and three phase versions. Ideal for cellar drainage, milking parlours, septic tanks and general drainage duties.
Submersible dewatering pump
Electric submersible pumps with cutter system for sewage and effluent.
Light sewerage applications with vortex impeller, 0.28kw. Free passage of 36mm. Max flow rate 10l/s. Max head is 17m.
Light sewerage applications with vortex impeller, 0.28kw-2.2kw. Free passage of 50mm. Max flow rate 10l/s. Max head is 17m.
Light sewerage applications with grinder impeller, 0.9kw-2.3kw. Free passage of 50mm. Max flow rate 4l/s. Max head is 29m.